Keep your axles alligned and protect your bearings with this pack of 8 Bearing Spacers!

Keep your ride smooth, fast, and responsive with Lynx Swift Lube Skate Oil. This high-performance, lightweight oil is made to reduce friction, prevent rust, and extend the life of your skate components. Perfect for bearings, and truck axle. It delivers precision lubrication whether you’re skating indoors, outdoors, or hitting both.

Key Features:

• 
  

  High-performance formulation for smoother roll & quicker response

  
  


• 
  

  Lightweight oil that won’t gum up or drag your setup down

  
  


• 
  

  Rust protection to safeguard bearings, & axles



• 
  

  Durability boost: helps reduce wear and prolong the lifespan of your skates

Bones® Speed Cream® is a high temperature, low viscosity synthetic skate lubricant specially formulated by Bones® to reduce friction, and provide a durable micro film of lubricant to protect against corrosion. We have found this lubricant to be superior to Teflon™ based lubricants in skate environments. Speed Cream R.F. makes your bearings faster and is very long lasting.

Contents

Bottle of Speed Cream and instructions

Finally, a bearing cleaning unit brought to you by the bearing company by which all quality standards are measured.

Go to the 'Videos' section below to see how it works.

Features

• Made of fluorinated high density polyethylene
• 7 spacers for a good flush in less time
• Cleans up to 8 bearings at a time
• Cleans all skate bearings
• Cleaning solvents not included

Contents

A detailed instruction sheet will also be included with the unit to insure easy and proper use.

Experience elite-level speed and precision with Kemistry Super 7 Bearings. Built with precision-polished chrome steel balls, these bearings provide effortless glide, durability, and consistency on every stride. Designed for smooth acceleration and top-end speed, the Super 7s are pre-lubricated with a high-performance speed lubricant, ensuring you hit the rink ready to roll. Whether you're playing at a high level or just looking to upgrade your ride, Kemistry Super 7 Bearings deliver performance beyond expectation.

8mm performance bearings. These are a great addition to any skate.

• ABEC-5: $28
• ABEC-7: $35
• ABEC-9: $44

QUBE Juice has a special grease and a single labyrinth seal. A great intermediate-level bearing with great feel and feedback. Only available in 8mm and sold in a pack of 16 bearings.

RollerBones 8mm Bearings – 16-Pack

Upgrade your skating experience with RollerBones 8mm Bearings. This 16-pack of precision bearings is designed for roller skates, inline skates, and all levels of skating—whether you’re practicing freestyle, hitting the rink, or racing outdoors. Built for smooth, fast, and durable performance, these bearings help you glide effortlessly while maximizing speed and control.

Why Choose RollerBones Bearings?

• 
  

  High-Performance Design: Engineered for precision and speed, giving you a smooth roll every time.

  
  


• 
  

  Durable Construction: Long-lasting materials reduce wear and tear for consistent skating sessions.

  
  


• 
  

  Versatile Compatibility: Perfect for 8mm axles on roller skates, inline skates, and quad skates.



• 
  

  Indoor & Outdoor Ready: Works seamlessly on rink floors, outdoor paths, or streets.

  
  

Perfect For:

• 
  

  Roller derby players looking for fast, reliable bearings

  
  


• 
  

  Beginners who want smooth, easy-rolling skates

  
  


• 
  

  Experienced skaters and begineers a like

Specs:

• 
  

  Type: 8mm precision bearings

  
  


• 
  

  Quantity: 16 bearings

  
  


• 
  

  Compatibility: Standard 8mm skate axles

Engineered for players who demand the best, Kemistry Swiss Bearings bring precision, speed, and durability to every shift. Manufactured with high-grade engineered components, these bearings feature polished raceways and premium chrome steel construction, maximizing efficiency and reducing friction for an ultra-smooth roll. Pre-lubricated and ready to perform straight out of the box, Kemistry Swiss Bearings ensure elite-level speed, longevity, and reliability.

• • 16 Kemistry Swiss Bearings included in a pack.

The QUBE 8-ball bearing is patterned after the Fafnir bearing of the late 70s, using our 3D technology we have re-created this bearing for today's market using modern day technology. This bearing contains 8 balls instead of the traditional 7 which has many advantages. The additional ball allows the load to be spread out evenly over the entire bearing instead of just one or two points. The additional ball also gives the bearing greater lateral load capabilities while turning, an important aspect of quad skating that many overlook. Lateral load is the force created while turning; it’s the momentum that wants to push you off the track. Using an 8-ball bearing will help distribute the load evenly over the entire bearing, in essence making a stronger bearing laterally. Combined with a deeper groove this gives you the ability to skate into turns harder with no worry of bearing blow out. For over 30 years this type of bearing has been the skaters choice for speed, if maximizing your cornering speed is what you’re after then the QUBE 8-ball bearing is the right bearing for you.

Why QUBE Gold Swiss Bearings Shine

• Swiss-Precision Engineering: Crafted with 3D Swiss tech for immaculate ball diameter, groove depth, and uniform inner/outer wall thickness to minimize friction and enhance roll.

• Stronger Steel & Anodize Finish: Hardened steel with a special anodizing process boosts strength and resists wear and corrosion even under intense use.
  

• Advanced Sealing & Lubrication: Features a double-Labyrinth seal plus SSL lubricant (Sure-Skate Lube, presumably) to keep out dirt, dust, and moisture — ensuring smoother performance longer.

When it comes to pure speed and long-lasting performance, Kemistry Ceramic Bearings stand at the top. Featuring ultra-lightweight ceramic balls, these bearings offer reduced friction, increased acceleration, and higher sustained speeds compared to traditional steel bearings. The self-lubricating, heat-resistant design ensures a consistently smooth ride while providing unmatched durability. Whether you’re pushing the pace in high-intensity play or cruising effortlessly, Kemistry Ceramic Bearings redefine speed and precision.

Super Swiss Six:

This unique design features six larger diameter balls instead of the seven balls used in most 608 bearings. The advantage of this design is higher speed, greater strength and durability. Made in Switzerland.

Features

• Single, non-contact, removable rubber shield allows for easy cleaning and less friction.
• High speed nylon ball retainer for greater strength and speed.
• Pre-lubricated with Speed Cream® racing lubricant
• Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.

Contents

• Set of 16 bearings
• Instructions
• Sticker

Bones Swiss Bearings have the best reputation in the skate industry and have had this honor since 1981, due to their performance and quality. Everyone who rides Swiss knows how fast they are and how long they last. Testimonials reveal them lasting several times longer than low cost bearings. Skaters who use Bones Swiss do so because they want the very best equipment they can get and know the difference between ordinary and exceptional. Our team is a who’s who of top skaters and we are proud to be associated with each one of them.

Elevate your skating performance with the Sure-Grip QUBE Ceramic Bearings, designed for intermediate to advanced skaters seeking superior speed and durability. These high-performance bearings feature eight ceramic balls instead of the traditional seven, allowing for more even load distribution and enhanced lateral stability during turns. Crafted with premium ceramic materials, they offer reduced friction, increased resistance to heat, and longer-lasting performance compared to standard steel bearings. Ideal for roller derby, speed skating, and artistic skating, these bearings are sold in a pack of 16 and are available in 8mm size. Please note that bearing washers and spacers are recommended (not included) depending on your skating style.